Smart Ventilation Systems

Pricing for the Smart Ventilation Systems category is not specified in the available product information. The appropriate equipment and project cost can vary according to the application, installation requirements, ventilation strategy, and selected configuration. Contact Building Performance Equipment to request current pricing and technical guidance for the BPE-XE-MIR-200i or BPE-CE-MIR-200i Plug-and-Play ERV.

SmartVent and HRV may describe different product approaches, so the best choice depends on the building and ventilation requirements. The BPE product is an ERV, which exchanges air while recovering energy through a direct counter-flow heat exchanger. Review the required airflow, filtration, controls, installation format, and project goals with a qualified HVAC professional before selecting equipment.

The three commonly discussed ventilation approaches are natural ventilation, mechanical ventilation, and hybrid ventilation. Natural ventilation relies on openings and environmental conditions, while mechanical ventilation uses equipment to move outdoor and exhaust air. Hybrid systems combine both approaches. The BPE Plug-and-Play ERV is a mechanical ventilation product designed for dedicated fresh-air and make-up-air applications.

The Plug-and-Play ERV is identified for residential homes, small offices, light commercial spaces, fresh make-up-air systems, dedicated ventilation applications, and Energy Star, Passive House, and net-zero buildings. Product information also identifies use for families up to six people and small offices up to ten people. Suitability should be confirmed against the project design.

The ERV supports indoor air quality by exchanging stale exhaust air with fresh outdoor air and using an integral MERV 8 filter for fresh and exhaust air. Its variable-speed fans allow ventilation control, while energy recovery helps reduce the operational impact of bringing outdoor air into the building. Final filtration and ventilation requirements depend on the project.

The BPE-XE-MIR-200i and BPE-CE-MIR-200i are designed as Plug-and-Play ERVs with factory wiring, testing, and a 120 VAC three-pronged plug. The horizontal and vertical models provide different installation formats, including a low-profile vertical footprint. Confirm dimensions, electrical requirements, duct connections, and installation conditions with the project engineer or installer.